Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford 83-94 6.9 and 7.3L General (https://www.dieselbombers.com/ford-83-94-6-9-7-3l-general/)
-   -   94 f350 (https://www.dieselbombers.com/ford-83-94-6-9-7-3l-general/71797-94-f350.html)

ktm43 03-06-2011 01:46 PM

94 f350
 
hard starting my 7.3 its like their is no fuel going to injection pump or filter change pump out still no fuel any one know something:argh:

stackboy6.9 03-07-2011 05:28 PM

have you changed your lift pump

ktm43 03-07-2011 05:47 PM

yes that was the first thing we did didnt help its just getting fuel:hellox:

DieselCrawler 03-07-2011 09:51 PM

not getting fuel outa the lift pump? how full are the tanks?

Sycostang67 03-13-2011 10:48 AM

Is it hard to start all the time or only when the motor is cold? Have you checked the retrun lines for leakage?

ktm43 03-13-2011 12:34 PM

hard starting
 
yes return lines are good did have a leak on back of engine going across to other bank it seems to lose its prime some way and stops pulling fuel up to the filter assembly i know its got to be something very simple but one of those problems that can drive you nuts:argh:

Sycostang67 03-14-2011 08:06 AM

Check the fuel line that runs underneath the motor on the crossmember, they have been know to rub through and leak.

wreckinball 03-16-2011 11:35 AM

Could be something stuck in the pick-up tube in the tank. So just clarify, you replaced the lift pump and arent getting fuel to the filter? If you are getting fuel to the filter, then check to make sure the fuel solenoid in the IP is getting power. Its the spade connection closest to the radiator on top of the IP. Also did you top off the fuel filter when you reinstalled it. If not then it isnt going to prime well.

ktm43 03-17-2011 06:54 AM

hard starting
 
hi thanks for the reply but after taking to another garage they found that the new fuel pump was bad !!! what is it with these autoparts mgf shit parts thanks again:jump:

wreckinball 03-21-2011 08:38 AM

If the pump was not installed properly, it can be ruined right off the bat. Not saying thats what happened but they need to be put in when the cam is just right. The bent long arm ones at least.


All times are GMT -5. The time now is 04:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands