so i got my 94 cab sittin on my 85 frame. i'm lookin for a wiring diagram so i can use my old engine wiring. this project sucks in the winter

 

Yeah! Winters in Buffalo are brutal! I used to reside in Lockport, about 25 minutes north. Hope you like the snow

 

anybody got a diagram by chance for 94 cab and idi engine? and ya this snow blows. replaced shear pins in the snowblower already because i left a 2x4 in the driveway. Then the torpedo heater ran outta kerosene and couldn't find a station with any and when i finally did they had already shut it down for the night

 

they will run on diesel and home heating oil also. i run mine on all 3. matters what i have at the shop

 

good luck. i tried doing that on my tow truck and found it much easier just to bolt a powerstroke in so everything plugged into each other

 

well in 94 ford still had the idi so the connectors should be the same. although the cab came off a powerstroke. i'd like to speak to you more on the idi to powerstroke switch

 

i went from a 90 cab with a 460 to a 97 cab with a pwerstroke nothing was even close. but on a 94 it might be alot easier with the newer cab already having the right wiring connectors. if the connectors plug into each other itll be alot easier. mine wouldnt even plug in so it was just easier to swap everything out

 

I'm not a ford guy, but haynes manuals are your friend. What year motor are you running?

 

Whats the matter, few feet of snow hampering things ?

 

ic ya need anything im right around the street if ya need a hand message me