1992 f250 7.3L idi IP proplems.Help?
 

ok i have a 92 f250 7.3L idi i am haveing problems with my injection pump and dont no wat to do to fix my problem so here is the problem. I am not getting any fuel out of the back of my IP i FSS has power and it is not sticking either i had the pump tested through columbus diesel supply also and they said it is working fine but its not working fine in my truck so wat could it be. Thanks!

---AutoMerged DoublePost---

can sombody please help me i need it i need to get my truck running it is the only vehicle i have to drive

Is the lift pump supplying fuel to the IP?

Like I said before, check your fuel pressure and flow from the lift pump, just cause its new doesnt mean anything.

yes the lift pump is suppling fuel to the injection pump and if u look at how much the lift pump is supplying u can tell it is suppling plenty of pressure

Watching it come out the fitting isnt a good judge of pressure. Do you know anyone with a gauge?

no i dont my dad probally does and one of my dads buddys is about to have a spear IP he is getting ready to take his out and put a new one in because the one in his truck now is leaking but it still works and every thang so im going to see if it changes any thang with my truck

did u have ur pump off? was it reinstall correctly? possibly timing off?

well i had it was doing the same thang before i took it out to get it tested

have you tried hotwiring the pump? wire from batt + to FSS. does take a while to fill the ip and lines with fuel before getting it to come out at injectors. last one i did took 4 or 5 tries with cranking it over, 15 seconds at a time then 5 - 10 mins for starter to cool.

yeah i tried hotwiring it before i had it tested and still never got any thang but i never tried doing it several times in a row but i will and i will let u no if there are any changes