Add a leaf question
I am looking to level the front of my 94 f250(regular cab 4x4) with the rear.
Should I be looking at the 1.5" or 2"? Thanks for the help! ---AutoMerged DoublePost--- I just measured from the ground to the top of the wheel well, got a little under 39" in the rear, and around 36" in the front. I'm thinking now maybe 3".. Any ideas? |
I did the 2" lift and with all the weight my front end is 1/4" lower than the rear still ... and i clear 315/75/16 with no rubbing anywhere
|
I got the 2" AAL and ended up 3.25" higher, they will settle a bit over time, but not much.
|
I'm not positive, but you might not want to trust the wheel well measurement. The wells could be "cut" into the body different depths. I would maybe go to the bottom of the body right behind the front wheel well and right in front of the rear wheel well. I think a 3" would probably give you a nose up look. I'd ask a 4X shop, they'd help with leveling kits, or if you want to lift it all the way around.
|
All times are GMT -5. The time now is 02:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands