strait axle swap on a 94 f 250
 

Dose anyone know what all needs to be done to do this

F350 donor truck will have everything you need :c:

D60, springs, track bar and mount

You may have to cut up some U-bolts a little, a little foggy but I'm pretty sure you will. Shouldn't take much longer than 2-3 hours to do the swap

I have the hole f 350 do I need to swap the rear as well? Dose it all just go right over and bolt up the 350 is a 93 and mine is a 94 dose that make a diff?

All you need to swap is the front. The rear is the same

only if the gearing is different in front to rear ... having an entire donor is nice ....

if your going from a twin I beam to D-60 ... theres some work to do ... i reacall someone telling me that the K member is different .... not real sure , but worth looking into further

What I'd the twin I beam the reason for the swap is the one thats in it I'm told will wear my tires crazy fast and although I did new wheel bearings ball joints and tie rod ends the tires still seam tipped in at the top

I have it ....... and no wear ... its all in the set up of the alignment ..... im running Cooper AT/3's and pro comp 3000's .... it rides great and for the small amount of time that I actually wheel the truck , it does awesome .... unless ur gonna rock climb .... I would just suggest getting a real good set up on the front end .... I also did the add a leaf, and I'm running 315/75/16's and no rubbing ....... if u can, go to 4 wheel parts and have them align ur truck, its spendy .... think I shelled iut 175 or so ..... much worth it as the tires were 1100.00 ........ minor expence with alignment:tu:

I have a 7 inch lift on mine with 315 75 16 as well I think my front end looks like it is two pieces