Common Rail Injectors
Solenoid failure: Caused by excessive fuel return, WHICH is cause by dirty fuel and water. There is a little ball and seat that gets worn fast from lack of proper filtration. As most of us know, 2 mic filters were suppose to be run from the get go in 2002 when the common rail came out. Obviously Dodge knew a hell of a lot more than Bosch, and ran 10 instead.
|
Originally Posted by wildbill
(Post 867619)
Solenoid failure: Caused by excessive fuel return, WHICH is cause by dirty fuel and water. There is a little ball and seat that gets worn fast from lack of proper filtration. As most of us know, 2 mic filters were suppose to be run from the get go in 2002 when the common rail came out. Obviously Dodge knew a hell of a lot more than Bosch, and ran 10 instead.
Also worth mentioning the use of a alcohol based fuel treatment will ruin a common rail injector and pump with a quickness Sent from my DROID BIONIC using Tapatalk |
very good info to know thank you guys
|
All times are GMT -5. The time now is 06:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands