Airdog
 

Can I use a airdog 100 made for in tank pump on one with a block pump? I can get a great deal on it so I hope so.

I bought it should be here Wednesday 475 new so if it dont work i will sell it.

I don't know, I've never heard of the in tank being put on the motor?:humm:

The one for intake pump just includes the draw straw for the fuel tank. You will want to remove the block pump when u install the aridog.

Luke

he means he bought the pump that comes with the draw straw 5 designed to retrofit into the in-tank pump fuel canister which is an open canister unlike the canister in the tanks for the block mounted pumps that has a draw straw inside the canister...

the pumps are identical, just the one for in-tank comes with a DS-5 where the other does not.

you may or may not need an adapter fitting to attach to the stock QC fitting on the factory fuel canister.

Got it put on just bypassed the stock canister thats what it said to do. The only thing differnt is one quick connect fitting. I just used the it for the stock pick up and push the hose over the return line tube that goes in the filler neck and put a hose clamp on it. Works great 19psi at idle 17psi wot. Now for bigger injectors.

eew I got rid of that stupid filler neck return long ago and used the factory draw line as an airdog return line, and DS-V as the new draw line...so 2 returns 1 feed.

http://www.digital-anarchy.com/image...69dfc7486c.jpg

eliminates 1/4 tank issues 100%

That looKs good. Might have to do that after i get the bed off.