|
home built cold air intake
6 Attachment(s)
Now remove the passenger's headlights and such so that you can grind away any high spots so the pot's feed duct will sit flush to the back of the radiator support.
Attachment 50550 Cut a bunch of holes around where the headlights / turn signal goes. Attachment 50551 Make it all so that when it's put together, Attachment 50552 100% cold air is drawn through to the BHAF. Attachment 50553 You may have to move the radiator's reservoir over a little to have things fit. The stock/OEM turbo intake duct will work just fine if you're in a pinch. Attachment 50554 Works good for me. :tttt: If you're in a hurry, simply replacing the stock/OEM air filter box's intake feed-horn/muffler with a bigger duct works wonders. Attachment 50555 :tu: |
| All times are GMT -5. The time now is 07:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands