When did the genius take it through a mud pit? Where is it at?

i had to pull my diff to put in the seals but i used a axle spreader so it was easy. mine also had a bunch of stuff in the tubes so i just used brake clean and lots of rags pushed through to get it all out. and i really like the seals you get from them i should have got 3 more and just replaced them all. and i have more money in my truck than i knew i had :argh::humm:

---AutoMerged DoublePost---

oh and i got the longside axle shaft so i did get a good seal from them like you said

Before I was home in January, I believe the bearing failed in late october, i cant remember, so before that.....The truck is at the house now, dad starts it up every couple weeks and runs it a little, same with the 90, he is planning on starting the body work on the 90 before too long.....

that is exactly what i did with the brake clean and rags.....i bought an extra set of axle seals a couple weeks ago, it was 70 bucks for the 2 seals plus shipping

nice write-up...thanks for all the info.