5.9 CR
 

Im interested to see what everyone with a 5.9 CR is getting on the dyno. Im intrigued to see the different set-ups that everyones running. Dyno sheets and vids are welcome.

I have seen Lloyd Mills owner of Mid-Atlantic Diesel Performance lay 950 on fuel with his VERY stout running CR.As a matter of fact MANY of the CR's that come out of his shop are forces to be reckoned with when they strap down and roll.

Tim Barber,
Won fall brawl, 1059 on fuel only.

I actually forgot about Tim,my bad.

guess that was before it took 3 people to push it off the dyno at the spring fling lol

Thats awesome. We have a shop that specializes in CR fuel injection and upgrades not too far away from where I live. Ive been told that you can get immense power out of them just on fuel as long as you have a deep enough pocket, but I get that youve gotta pay if you want to play. I didnt know you could get that much though.

---AutoMerged DoublePost---

Thats crazy, in a good way. Does getting that much also require interior mods to the engine?

---AutoMerged DoublePost---

:D With great power can come great destruction. :bombin:

i was pretty happy with my pull at 499.6 and 1136

07 CR, smarty on 9, air dog, 90 DDP's, head studs, full k&n, aem water meth

that was with the stock tranny screamin the whole time

i am curious to see what it will do now with a full billet, ats copilot, ats 2nd gen manifold, propane, nitrous, and an intake elbow + what was listed up there

Man that's awesome. Do you have the REVO update on your smarty? It sounds like you've got a pretty sweet setup. If you get a chance to run it again, drop an update. :tu:

Nothing fancy here. 423/824. Just Bullydog. Need to try stacking my quadzilla on it then run again.

Just ran my 06 today at Beans Diesel Performance. First the mods, K&N drop in filter, AirdogII, Valair DD with bilet flywheel, 6" Aussie cut stacks ( cat still installed), and biggest of all Smarty on level 9. Best HP of 509.8 and 1025 TQ

my 06 CR did 620.74 hp it has 100 hp II sticks, AD DF165, maxspool springs, titanium retainers, 63/68/12, ATS 2 pc manifold, smarty tntr, .625 studs, ice box, custom intake tube, wicked stg 3 cp3, fully built auto. 8.42 in the 1/8 mile first time to race last weekend.

Our 2010 shop truck did 466HP and 945Tq at weekend on the edge with a mini maxx, 5" inch Flo Pro exhaust, and a afe stage 2 pro 5 r intake.

My dads 2006 did 417 and 850 something with a smarty on setting 5 with the sub settings tweaked and no muffler and thats all the mods it has on it

My truck has done a best of 733 uncorrected at 2550 elevation. I have piles of dyno sheets from over the years. Some looser stole my best sheet of the wall at the shop a few years ago. But I still have plenty of 700+ sheets sitting around here. All depends on the dyno and the weather. The truck is pretty consistent though. Everything listed in my sig. I tuned it on the dyno 3 years ago when I did 733 and haven't changed the settings on the smarty since. I still daily drive the truck and tow with it all the time. Here are some pics and a dyno sheet.

[IMG]http://i253.photobucket.com/albums/h...nce/vinny5.jpg[/IMG]

[IMG]http://i253.photobucket.com/albums/h...nce/Vinny1.jpg[/IMG]

[IMG]http://i253.photobucket.com/albums/h...e/713horse.jpg[/IMG]

[IMG]http://i253.photobucket.com/albums/h...e/100_4746.jpg[/IMG]

http://i253.photobucket.com/albums/h...-23-1A_024.jpg

http://i253.photobucket.com/albums/h...acepics012.jpg

http://i253.photobucket.com/albums/h...estload30k.jpg