Originally Posted by 94Matt
(Post 441204)
swapping over the hydroboost from the Dodge and using a super duty vacuum pump for the heater controls.
|
2 Attachment(s)
That's about the best I can do, I'm not a photographer by any means and it's rather tight under the hood now.
|
You can see the little vacuum pump in the first pic. It's mounted to the firewall just above where the brakes bolt up.
|
Did the plunger rod just bolt up to the pedal inside or did you have to mess with it?
|
The angle was off to use the stock mount on the pedal. I made a new one about an inch down from where the stock one was and had to come up with a new brake light switch. Not bad, maybe an hour into the hydroboost swap.
|
All times are GMT -5. The time now is 01:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands