http://s1156.photobucket.com/user/Shottzillanwt/media/Mobile%20Uploads/image_zpsuzwjegnm.jpeg.html

http://s1156.photobucket.com/user/Shottzillanwt/media/Mobile%20Uploads/image_zpsuzwjegnm.jpeg.html
Badow

rad support mounts are the only keepers, gonna chop and reweld the other 4. Had to cut the front most box perches off(chebby can is 10.5 inches longer)Kinda mocked the hydroboost, the 2 holes on the inside fit perfectly the outter ones i gotta poke holes in the firewall, what a pile of crap with the abs motor... Clutch master ill have to wing it.. Looks to be a stamp on the firewall where it would have a clutch master if it was a manual unit?. The nbs cab has a stamp on the floor for the shift tower, cut that out and had to trim a little extra, gonna have to run efans.. Hopefully low enough profile ones exist.. Then i will attempt to intergrate the bcm to the engine harness.
That was a good weekend :rocking:

Anyone have some insite on the integration of the cummins to the chevy bcm?

Awwyeaaa! Got a hold of a 02 2500hd Big hood! Not that it needs it to be cool..but now its turned up to 11!!
Attachment 30873

Dont know why any of my photobucket img's come up black.. Is it me or is it the forum

They look black to me too

Any updates on the project?

Yah idk why they are blacked out.. Maybe the forum doesn't support img links??
Its all bolted down and im wating on a ebay order the clutch pedal assembly, brake line junction to get rid of the abs pump, and the headlight's

http://s1156.photobucket.com/user/Shottzillanwt/media/98B0FF5F-504C-4B11-92F5-D7EACE5B921F_zpsujb4v7wm.jpg.html