V2203 to AX15 adapter
I'm hoping someone out there in the forum has some sort of CAD design to marry a Kubota V2203 to an Ax15/NV3550. I have a friend that can cut it out for me for the cost of material, but I don't have a good template to work with, nor do I have the transmission yet.
Any help out there? I'm mechanical, but not much of a fabricator, and being able to hand of a file would make my life a whole lot easier. |
Try Phoenix Casting and Machining in Juniata Nebraska. We are doing the same V2203 to AX15. Need to make sure you have a standard depth SAE 4 flywheel housing and SAE10 flywheel.
|
Originally Posted by Duallyjeepster
(Post 1214989)
Try Phoenix Casting and Machining in Juniata Nebraska. We are doing the same V2203 to AX15. Need to make sure you have a standard depth SAE 4 flywheel housing and SAE10 flywheel.
|
They sell an adaptor that goes between the SAE4 flywheel housing and the clutch housing and an adapter between the SAE10 flywheel to the clutch. You do not need the original jeep flywheel. The might sell adaptors to do different set ups, you would just have to call and ask. They’re very knowledgeable people.
|
Originally Posted by Duallyjeepster
(Post 1214989)
Try Phoenix Casting and Machining in Juniata Nebraska. We are doing the same V2203 to AX15. Need to make sure you have a standard depth SAE 4 flywheel housing and SAE10 flywheel.
|
All times are GMT -5. The time now is 06:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands