new take off 2403t exhaust manifold
 

These are not mine! Just passing on the deal. I purchased 2 .

They are center dump at about 45* up. And already have a 4 bolt turbo flange. Not sure what flange though. A very nice option

http://m.ebay.com/itm/221649786205?nav=WATCHING_ACTIVE
Hope that works.

Thanks
Ken

Hey thanks for the find! I just ordered one, it looks very similar to the turbo manifold off the V2003t that I have with just a little different angle to the flange. This one angles away from the motor, the other is slightly angled toward. These should be a great improvement over the Carrier manifold.

I was planning on making one with similar placement but for the cost this is perfect. Now I have to figure out what flange it is. I'm excited to get it here and mock up the turbo.

Any idea what a good compound setup would be? Or what is better. I have a Saab turbo now but looking for better combo.

The V2003t I have has a TDO3 that bolts to that flange, it looks to be the same as this one. I suppose that could be 1/2 of your compound setup.

At first I will go single but later I would be experimenting with turbos. Maybe a good single is more then enough. Not looking for maximum performance just for good responsive power with little lag

They won't ship to Canada :dang: and I keep blowing turbo gaskets left and right. Might have to make my own

That sucks. Have never shipped to Canada but my work has. I will find out what it takes. Maybe you can have it shipped to me and I can just forward it to you via UPS for shipping fees

Edit: I talked with the guys in shipping, if you wanted to go that route and have it shipped to me ,there wouldn't be a problem. So the offer is out there to just cover the extra shipping charge.

Thank You for the heads up :c:

Just received the manifold! Looks good and hugs the head a lot more than the others. I should be able to mount the turbo to the side instead of on top and still clear the vacuum booster.

I got one coming, but I won't see if for a few months. Hey FTE, can you put that manifold on one of your spares engines and take some pictures?

yall have fun