Kubota V2203 Crankcase Breather?
What has everyone done with there Crankcase Breather?
I ask since I think that with the added Turbo to the Kubota V2203 it might overload the factory Crankcase Breather? |
When you turbo them you need to unhook the hose from the breather to the intake, then just vent to a catch can or just let it hang along the side.
|
Originally Posted by FTE
(Post 1036499)
When you turbo them you need to unhook the hose from the breather to the intake, then just vent to a catch can or just let it hang along the side.
|
you are calling the flat plate that covers the diaphragm on the valve cover the PCV valve?
I was sort of hoping to remove that plate as well, or use it as a oil fill |
Originally Posted by JesterGrin_1
(Post 1036507)
So there is no need to modify the PCV valve? Just take the line as it is and either put it in a ventilated Catch Can or run it down to just below the engine?
|
All times are GMT -5. The time now is 10:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands