|
I would look at the governor spring first, if it's not strong enough your not going to build proper power.
|
gunna try and get the rpm sensor running correct today!
|
I encourage you all to Join my new facebook page and be sure to post some pictures of your finished builds! Its G&J Customs Kubota Diesel Swaps
|
Originally Posted by Gaines12
(Post 1003280)
Haven't had a chance to get on here for a while but I've got a lot of things done on the swap. We made a power steering bracket and an alternator bracket. Made an adaptor for the turbo and also changed the fuel pump out and extended hose into the tank. Working on the adapter plate still, were almost done with that and then it'll be time to drop it in. I will post pictures of all the adaptors and the flywheel that we milled down and retapped for tthe ford clutch
---AutoMerged DoublePost---
Originally Posted by Gaines12
(Post 1003280)
Haven't had a chance to get on here for a while but I've got a lot of things done on the swap. We made a power steering bracket and an alternator bracket. Made an adaptor for the turbo and also changed the fuel pump out and extended hose into the tank. Working on the adapter plate still, were almost done with that and then it'll be time to drop it in. I will post pictures of all the adaptors and the flywheel that we milled down and retapped for tthe ford clutch
|
| All times are GMT -5. The time now is 10:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands