SPEEDOMETER FUMMINS HELP !!!
 

I have a 1991 f250 witha 92 cummins in it. I swapped a np241 LDL transfercase on it, and am having a difficult time figuring out what to do for a speedo. FORD has a mechanical cable, while the np241 uses an electronic vss. anyone with some info is greatly appreciated!!

I cant tell you anything from experience, but if you can remove the ford speedometer and use the dodge one in its place, that would solve it if you can cut out the ford one smooth enough from the rest of the cluster. Good luck to ya!!

This is what i came up with :tu:

Looks sweet!!!! :tu: Can you post up pictures or link to a build thread?






:pics:

go under "ford" then "1983-1994" then go like 3 pages in and look for custome guage cluster and you can look at all the pictures i put up... ask questions if you need!!

My speedo runs off of the rear end. Can't help you there.