Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Diesel In Distress - Support Ticket (https://www.dieselbombers.com/diesel-distress-support-ticket/)
-   -   7.3 NO START (https://www.dieselbombers.com/diesel-distress-support-ticket/82194-7-3-no-start.html)

7.3STROKER01 09-01-2011 07:11 AM

7.3 NO START
 
Parked my truck in my driveway last night, mowed my grass. got in my truck to leave and no start, just crank and crank. checked every possiable fuse/relay, all good. wait to start light does not come on now either? any ideas

06 RAM 09-01-2011 08:13 AM

injector pumps usually fail at around 100,000 miles in 7.3

7.3STROKER01 09-01-2011 08:32 PM

Relized my first post was a little vague, its a2001 powerstroke, i have fuel in filter bowl, no start, checked all fuses and relays. i have no wait to start light and no rpms while cranking? any ideas?

farmerdude 09-01-2011 10:16 PM

Cam sensor, maybe?:humm:

RanchhandTCR 09-02-2011 10:05 PM

If your not reading any RPMS then your computer wont be able to tell you truck is running at then750 rpm to start the injectors. you can try replacing your crank sensor located underneath the truck in the front left

7.3STROKER01 09-03-2011 10:49 AM

Thanks for the info, but unfortunetly I found out my pcm is brain dead.

CSIPSD 09-04-2011 10:44 AM


Originally Posted by 06 RAM (Post 793375)
injector pumps usually fail at around 100,000 miles in 7.3


There are no "Injector pumps" on a 7.3... And there is very little that fails around 100k on a PSD...


Originally Posted by 7.3STROKER01 (Post 794192)
Thanks for the info, but unfortunetly I found out my pcm is brain dead.

Do you have a chip installed?

Have you checked the PCM power fuse under the hood?

7.3STROKER01 09-06-2011 08:59 AM

the first thing was to check all the fuses everywhere, and then i pulled the chip out. had a good friend who works at a ford dealer stop on his way home with the scanner and his repair manual, after some testing and the scanner not connecting, the pcm is no good.

CSIPSD 09-06-2011 09:57 AM

Did you remove the chip with the key in? That will cook a PCM every time.

Also, make sure your chip is well secured once you get a new PCM.

7.3STROKER01 09-06-2011 10:19 AM

yea the key was out and battery was unhooked. and this was after the fact it didnt start.


All times are GMT -5. The time now is 09:32 AM.


© 2024 MH Sub I, LLC dba Internet Brands