ABS Lights And No Speedo
 

well I now this isint the most urgent thing in the world but I figured it would get the most exposure here and hopefully someone might have an answer before I get so fed up with this truck that I use it for target practice with my ar15

never the less I have changed the rear end speed sensor,the output speed sensor in the transmission, all new fuses and I still have the abs lights on and no speedo, I have to go to chicago saturday and I would really like to have a working speedo, and yes the gauge cluster is good because we swapped it in another truck and it worked fine.... like I sad above I am at my witts end with this thing and I am about ready to trade it in. suggestions?

is your odometer working?

no it isin't

your gonna need a schematic or maybe some one can tell you which wires to check. Check power going to the module and ground coming out of the module. Its either a wiring issues or maybe the ABS module is toast.

check yer fuses.... i had the same issue a while ago. i don't remember exactly what the problem was but i'm thinking it was one of the fuses??

most likely a ground.

Might want to check the wiring on that back speed sensor. Mine got all frayed and shorted out because of all the gravel roads and snow during the winters.

dodge or chevy or ford?

id check your fuses..

he sais he has all new fuses in the truck so im guessing he just went ahead and replaced all of them? Its more than likely a wiring issue.

what kind of truck Bia , ?

98 dodge 3500. Its in his signature not trying to sound rude I swear lol but its there unless for some reason you cant see it??

spoolinaround's Sig:98 3500 RC 6x6 Dually Auto 12V #10 Plate HX35 Hybrid with HTT's HX40 wheel & housing kit

nope didnt see it in there.. im not worried about you offending , no worries...:U:

---AutoMerged DoublePost---

Can you do ADHL test on it? check the codes?

Take a pair of jumper cables and clip one end on your Engine pulling hook and the other on the ground terminal of your battery and see if they work
DM

well I took the plugs apart and cleaned the conenctions with a pipe cleaner and coated everything with dielectric grease where it connected and still nothing, I'll try the jumper cables in a few minutes, and yes I changed the fuses to rule that out

Attached is more help

just a update: I have done everything humanlly possable and nothing worked so I just gave up on it and bought a navigation system that shows the current speed in the dialog, thanks guys