03 5.9 injector install
 

HI GUYS , dumb ? when installing injectors can the wires on top be crossed and if so any one have the correct wiring?

are you talking about the wire that hook to the injectors??? I dont think you want to switch them around might throw off the firing order...really in these cases the wires should just be long enough to reach the injector there supposed to be hooked to. Dont know for sure though because ive never really seen under neath a valve cover of CR:humm:

I would not switch them up.

It's pretty hard to mess up the wiring. Wires should match up when you reinstall the valve cover gasket.

Sorry guys, can the wires for each injector be crossed. one injector ,two wires on top of the posts

They could possibly be switched, then that injector would not work properly, if even at all. When you put the gasket back on it is easy to tell which wire goes where, or at least it was for my 06. I am sure someone on here will chime in with a pic to show you how to wire them up, I know that the 06 harness is different from teh 03 or I would go out and take a pic for ya.

Read thorough here
https://www.dieselbombers.com/5-9-li...tml#post354997

From what I see, it does not matter how they are connected. Thanks for the info, I'll keep serching for the problem.

Closed You Have another thread on your issue already in Diesels In Distress Forum