86 6.9
 

I recently changed the o rings and washers etc. in my fuel injectors because some of them were leaking. When I tried starting it, it started for a few seconds blew out alot of smoke and died. Before removing the injector pump, I made marks on the timing gears and made sure they lined up on re-assembly. It was dark when I put the pump back on and pinched the wires that go to the pump, between pump housing and top of the motor. I checked for continuity, and 12 volts on the double wire and it was good. This is an 86 ford f350 6.9, any suggestions would be greatly appreciated.
BOMB ON, bobaloo!