Daniel Leipart |
06-27-2015 07:52 AM |
Tranny codes, stuck in 2nd help!!!
I have a 1998 c3500 with an 4L80E I had the truck go into limp mode and I pulled the codes p0758 and p1860. I just replaced both A and B solenoids and filter. checked the voltage at the fuse, ignition (on the white wire) and at the pass-through plug on pin E all of which have 12+ volts. the truck still has the same issues and I dont know what or where to check anything else. also I replaced 2 ground straps and added 2 more grounds one from the battery to the block and one from the transmission to the frame. previously I had a similar issue and dont remember what the codes were but i had put a small ground wire to the tranny from the frame and it cleared up the issue, it doesnt seem to be the case this time. also i swapped computers and I swapped pmd's and nothing has cleared it up
|