6.0 Hot No Start, noone knows why
Year of truck: 2005 F-350 335012 miles
Motor: 6.0 Cab/bed configuration: Crew Cab Long Box, lariet Mods: EGR Delete Anything you've done recently: Problem started two weeks ago, all changes are since then: HPOP IPR IPC Crank Sensor, batteries, starter, fuel filers, glow plugs, injectors, oil change, mass air flow/air charge, FICM updates How is the truck primarily used: 80 mile a day commute as well as work truck on weekends When did the issue start, and if it's intermittent or all the time: Approx 2 weeks, replaced all above, ran ok three days, back at same problem. Anything else that might pertain to the issues at hand: have a lot of experience as a mechanic, trucks been to three other mechanics, no one can figure it out. Any codes, and what are you reading codes with: no codes exist |
Have you also replaced the Stand Pipes and Dummy Plugs? these are also very common causes of High Pressure Oil leaks and will also cause a hot no start condition.
|
Originally Posted by bobfbigman
(Post 1057864)
Have you also replaced the Stand Pipes and Dummy Plugs? these are also very common causes of High Pressure Oil leaks and will also cause a hot no start condition.
|
All times are GMT -5. The time now is 10:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands