1st gen acts like it has no fuel
 

I ran my truck out of fuel yesterday on my way home from work.. so I put 5 gallons in it and bled injectors on the side of the road with my mom (yeah I had to call my mommy :argh:) after it fired up it acted like it still had some air in the lines which I expected. But now even after running it for over an hour at an idle it still act like its out of fuel at high RPMs or when I go up a hill..it cracks and pops and blows white smoke.. I had to call off work today because of this and I'm not sure where to start looking.. I could really use some help guys. Thanks

With the truck running at idle, crack each injector to see if it changes the way truck is running. Sounds like an injector may be bad. Or sucking air from somewhere


Ready to be back in a truck