| carlspeed |
04-05-2014 10:35 PM |
I've spent the last two weeks trying to track down an exhaust leak and install a leveling kit. I did new dorman up pipes, and I think I've got the rest of the leak narrowed down to the driver's side manifold. I repaired the pipes, tightened the manifold bolts, and made it almost non existent except for a small pin hole leak from the manifold on the back by the firewall. Hopefully in a few days I can order the new manifold and have the truck back to factory, and ready to mod. It's got a superchip programmer, and an afe intake. I'm not sure if the exhaust is aftermarket, because where the cat would be isn't there, and there is a pipe there held by u clamps. Looks like the way it was designed, and I'm under the opinion that factory exhaust had the cat welded in. In any event, it's getting better and better, and buys I just need to finish up with the leak stuff, grab a set of gauges, and if the exhaust isn't aftermarket, do a 4" turbo back.
http://www.carlspeed.com/img/f350/IMG_2438s.jpg |
