Bobcat bucket pivot pin broke
I snapped the right side pin for the bucket pivot point on a skidsteer. How in the heck do you get that apart???????
I pulled the two bolts out but I couldn't get anything else to budge. |
Must still be in a bind, or it's corroded in. Try using a little heat and some penetrating oil.
|
I just talked with the Bobcat dealer and he said that I needed to remove the grease zerk or it would never budge. I guess I was fighting the packed grease. Thats why they won't pound in.:argh:
I guess you learn something every day. |
At least you were smart enough to call the dealer and ask. I've seen many people in my day who would have just gotten a bigger hammer and drift and started whackin' away at it. :pca1:
|
Originally Posted by ETXBlueRam
(Post 272732)
I've seen many people in my day who would have just gotten a bigger hammer and drift and started whackin' away at it. :pca1:
If in doubt it's always better to ask. Someday I will learn this method:argh: |
I'm a firm believer in "Working smart, Not Hard"
|
How did you break the pivot pin?
|
get a 12" long x1" diameter bar stock and weld a few foor of handle off to the side, heate the stuck pin with rosebud then have yer buddy hold the drift handle then wack the sucker with a 20# doublejack.........dont heat the pin but heat the frame around the pin
|
Originally Posted by cummin73
(Post 273046)
How did you break the pivot pin?
I was happy that I didn't stick my head thru the window on the cab door. |
Wow that must have hurt. I have hit somethings hard but have never broke a pivot pin before.
|
All times are GMT -5. The time now is 05:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands