I just bought an 05 duramax.
What do i need to know about it? I'm new to diesel but i love it!
|
Well first off what are your plans for it?
|
Originally Posted by 1AMatt
(Post 875914)
Well first off what are your plans for it?
|
its gonna be my toy hauler. i need lots of torque and power
|
the Duramax is a great engine, LLYs and LBZs where good years
Originally Posted by DirtyMaximus
(Post 875937)
its gonna be my toy hauler. i need lots of torque and power
|
sweet thats why i bought an 05
---AutoMerged DoublePost--- whats the best tuning system for it? |
Originally Posted by DirtyMaximus
(Post 875976)
sweet thats why i bought an 05
---AutoMerged DoublePost--- whats the best tuning system for it? And then your tranny will limp.:tttt: |
how so?
|
EFI live will make you poop your pants how so? no, EFI Live is the best in terms of customization. light HP increase, tow tunes, high HP, race tunes, etc what ever you want EFI Live can probably do |
That's what I'm hearing. sounds like that's what I'm getting!:tu:
|
Keep in mind the stock trans can only handle 100 hp more than stock. Otherwise, you'll be buying a new one pretty quickly!
|
Thats good to know! thanks man
|
that's 100hp on a good day, many don't make it that far a few do.
after your intake, exhaust, egr blocker, EFI Live & gauges, i would upgrade the transmission next |
like a torque converter or?
|
Converter and Shift Kit
Luke |
so far my 06 is holding a 100hp tune without limping, but it's also an edge evo tune so.....
|
Originally Posted by Diesel Dawgs Performance
(Post 876614)
Converter and Shift Kit
Luke |
right on thanks guys!
|
ok now i put a k&n intake and filter on my stock 05 lly and now i have intermittent power loss! some times i hit the gas and shes all there other time i punch it and its like im towing my house! do i need a tuner for the intake!?!
|
take out the k&n and put a factory filter in...
|
it finally through a light and it was the mass airflow sensor. i unplugged it and got the power back.
|
K&Ns can get the MAF sensor contaminated with oil. try cleaning the MAF sensor. i run a K&N and haven't had the issue but have heard of plenty that do
|
ya thats what i was thinking too. tomorrow im getting a can of mas cleaner
|
ditch the K&N and get an S&B intake, you'll be much happier:yeah:
|
X2 on gettin rid of the K&N. The factory ones flow great! You just need to change the mouth piece :tu:
|
well i cleaned the sensor up and it works great now thanks guys:jump:
|
All times are GMT -5. The time now is 07:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands