GAUGES
I am looking for some gauges and would like some input from site members. I need A turbo drive pressure 0 to 100 psi (exhaust backpressure), Two IAT (intake air temp) and two boost gauges 0 to 60 psi (these 2 are the easy ones to find). I have VDO VISION BLACK SERIES 2 1/16 inch mounted in my a pillar and wanted to match these,(they are basically all black with white #s and red needles) but I can't find any so I may have to settle for something close or change out the ones I have to match any new ones that I install. Any suggestions welcome.
|
vdo vision black series?
|
Remember # 61 for Dallas in 1994?
Originally Posted by 2500HeavyDuty
(Post 801323)
vdo vision black series?
|
yeah your probably going to have to get a gauge from somwhere alse if you want matching boost and drive pressure gauges. why would you need more then 60psi, this is going on a dmax. are you planning on running twins?
they make aftermarket digital gauges that can have multiple readouts at the same time that fits in a 2-1/16 hole. newton |
over 60psi??? man there must be some serious mods done to get that much boost
|
Originally Posted by BriteWhiteRam
(Post 801934)
over 60psi??? man there must be some serious mods done to get that much boost
he does want two boost gauges, so im thinking twins |
Originally Posted by 2500HeavyDuty
(Post 801597)
yeah your probably going to have to get a gauge from somwhere alse if you want matching boost and drive pressure gauges. why would you need more then 60psi, this is going on a dmax. are you planning on running twins?
they make aftermarket digital gauges that can have multiple readouts at the same time that fits in a 2-1/16 hole. newton |
whaaaaaaat did you meet him?
|
Originally Posted by 2500HeavyDuty
(Post 802245)
whaaaaaaat did you meet him?
|
All times are GMT -5. The time now is 03:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands