Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Chevy/GMC Duramax 01-04 LB7 (https://www.dieselbombers.com/chevy-gmc-duramax-01-04-lb7/)
-   -   Clanking from front passenger side on my DMAX (https://www.dieselbombers.com/chevy-gmc-duramax-01-04-lb7/95921-clanking-front-passenger-side-my-dmax.html)

GSE-DMAX 05-10-2012 11:22 AM

Clanking from front passenger side on my DMAX
 
I recently purchased a 04 LB7. It has 65,000 miles on it. After I purchased it I changed the oil and greased up all the fittings first thing. Just yesterday at 68,000 miles my buddy ridding in the passenger seat noticed a clanking coming from the front on the passenger side. It's a metallic clanking sound. It sound like its coming from the wheel. I only notice it when going over speed bumps at low speeds. I haven't torn into it yet? Any suggestions? Wheel bearings? The hub? Has anyone has the same problem?

2004LB7 05-10-2012 12:09 PM

:welcome:

jack your front end up, and see if there is any play in the hub or u-joint, etc. also it may be the bolts on the front cross member (fixed by putting washers on them).

does it occur while turning hard and backing up like in a drive way?

Eddiebuntain 05-10-2012 01:23 PM

X2, & check out the whole front suspension, could be balljoints, shocks, etc.:c:

GSE-DMAX 05-10-2012 02:24 PM

Thanks for the insight. Il let you all know what I discover. I do actually notice it when I'm turning. But again only at low speed. I'm not sure if that's cause
My trucks so loud or it goes away when I pick up speed.

GSE-DMAX 05-11-2012 08:22 PM

I checked it out. I can't believe it I feel sorta like a jackass. I didn't know that the hub cover was 2 pieces. The inside one was loose and rattling. I just re-sat it and it was good to go. Thanks guys for your advice though. Look forward to further discussions with y'all.

Eddiebuntain 05-12-2012 02:44 AM

That's why I don’t run hubcaps. Well, that and it's just more crap to deal with when messing with the tires.

1AMatt 05-16-2012 01:19 PM

That was an easy fix.... I wish every clunk was that easy to fix :argh:

GSE-DMAX 05-18-2012 09:26 AM

Yeah I agree. But if it all were that easy it wouldn't be any fun either


All times are GMT -5. The time now is 08:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands