DTC P0380
DTC P0380
Ok, so the code reads "Glow Plug Feedback Curcuit".... What is the problem and how does it get fixed???:s: |
If its is a FE(federal emissions) truck then it is probably the Glowplug relay, from the research I did it would appear that its about $70 at a GM dealer for the whole glowplug controller
The gow plug relay is mounted on the drivers side valve cover at the very rear behind the turbo outlet pipe. It's a small black plastic box with a 4 wire plug on top of it and then 3 large studs with big cables hooked to it. The relays in it are sealed and you cannot inspect the points inside of them. Part# 97371491 Hope that helps you:c: |
thanks soo much man, i'll take a peak at it and get the part and change it out... We will see if this code will go away...
|
Did changing the relay get rid of the code? My truck has been throwing that code on and off all winter, but the truck never had a problem starting in 5 degrees without being plugged in.
|
I havn't had a chance to get to it... but I don't notice a difference with or without the code either... I do plan to fix it at some point tho...
|
been having the same problem also have to keep clearing the code with the banks pda. but it comes up every time i start the truck.
|
I don't think it's expensive or hard to do... it's just that i've got a baby due in a couple months, building a house as owner/builder/contractor/sub-contractor, and got everyday life and 40+ hours a week of work going on sooo i've been spread pretty thin lately and the dmax has been on the back burner for a little bit... :scare2: can't wait to get time for the truck again... :s:
---AutoMerged DoublePost--- if you get yours changed out before i do, let me know if your code goes away... |
All times are GMT -5. The time now is 06:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands