Turning Up Injection Pump On A 6.5
Anyone here know how to do this? I read some wheres a while back how to but now I cant seem to find it.
Thanks Brian |
Pm member wtfd6. He builds these pumps I know he knows how to do it.
|
|
thanks Logan!
|
yes keep it to 1/4 turn or less. if you go farther it will run the risk of siezing up.
|
10-4. Its a buddys truck. He just put 4" exhaust on it and now he wants a little smoke. I told him those engines can only handle so much. We'll see how it goes.
|
Originally Posted by wtfd6
(Post 121138)
yes keep it to 1/4 turn or less. if you go farther it will run the risk of siezing up.
|
i turned my fuel up on my 6.5 diesel 1993, the fuel screw was in the fuel res. in the injector pump. (10 min mod)i know about runnaways so i found out how to cut off the fuel on mine ( green or red wire ontop of injector pump)under the hood if i ever start her up and she opens up on me. acurate temp readingsis a must:rocking:
|
I have a 96 2500 turbo, how do I turn the IP pump up on it?
|
You have a Ds4 pump which is electronically controlled. The only way I know to turn them up is to buy a ecm that is turned up.
|
Thanks
|
on the 1995's do they still have the Ds4 injection pumps? so you can't turn them up?
|
95 has a DS4 pump. You can turn them up but it has to be done through the ecm.
|
you can do an optical bump too but it is NOT reccomended.
unplug your vaccum pump youll have all the smoke in the world |
I turned up the screw yesterday and right when it started it ran away. I had to cut the fuel line to stop it. (Tried chocking it with a towel but didn't work). I turned the screw back down and now it won't start.
---AutoMerged DoublePost--- Can anyone help me with that? Is there supposed to be a little spring in the hole were the allen head is. Trucks a 92 6.5 |
All times are GMT -5. The time now is 06:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands