Help......code po216????
what do I need to do to fix this??? Do I need to put on a new ip or is there another way that I can fix this?????
|
i have been running that code for 8 yrs i found out my pump was turn to far to right the wrong way
but the code is death code for a pump is it putting you in limp mode or what have you done to your truck latey before got the code |
I had a coolant leak behind the timing cover. had to pull front of motor apart to replace two small gaskets and loosened pump to get cover off. So what your saying is that i need to roll pump counter clockwise to correct. I thought I put it back in the same spot .
|
maybe you didnt tighten the set screws all the way and its slowly turning?
|
tried moving pump with pry bar it is tight. if i turn it counter clockwise will this reslove issue.
|
put the pump at 12 o clock if anything you want it bump just litt to driver side you you really need put on computer to set it
|
All times are GMT -5. The time now is 11:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands