can u make a 6.5 sound good ?
what do i need to do to hear the turbo i have the stock i think 2-3/8 pipe if i cut the muffler off and cat would it sound good or should i go bigger ? i really want to hear the turbo ? any suggestions?? thanks :humm:
|
Go with 3" or 4" on it or a better turbo.
|
or just get a duramax they make cool turbo noises
|
Originally Posted by bobcat67
(Post 602049)
or just get a duramax they make cool turbo noises
2.5" crossover pipe, 3" turbo back, 4x12" tip sounded EPIC on mine. I got "I've NEVER heard a 6.5 sound that GOOD" a lot. |
2.5" crossovr,3" down pipe and 4" exhaust!! sounds nifty!!
|
hey thanks guys ill look in to it
|
Remember if you get an aftermarket air intake, or just remove the turbo silencer, you get a lot more whistle out the front end.
On a side note, best turbo whistle out the exhaust I've ever heard was 4in out in front of the passenger rear tire. |
This is just a slow plowing vid. i made, but the truck sounds good in it!
|
if you dont like a lot of resonance when at high way speeds use a dynomax bullet muffler. still gives you that strait pipe sound but without a whole lot of resonance
|
Originally Posted by Paintballrepins
(Post 603536)
Remember if you get an aftermarket air intake, or just remove the turbo silencer, you get a lot more whistle out the front end.
On a side note, best turbo whistle out the exhaust I've ever heard was 4in out in front of the passenger rear tire. |
All times are GMT -5. The time now is 11:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands