Limp mode
Long story short, 95 2500 4wd,1386xx miles. Truck was stolen 11/08 & I just got it back 7/10. Was missing parts. Starter, pmd & cooler, ECM. I bought a 94 ECM off eBay, got the truck running but trans only has 2nd & reverse. So I bought another ECM for a 95 but I had to take the EPROM out of the 94 ECM because the 95 did not come with one. Still in limp mode. Checked for codes and get code 36. Is the EPROM causing this or is the trans having mechanical issues not related to the ECM? Any help would be appriciated as I get no replies at diesel place.
|
eproms need to be coded to the type of pump you have. so if you got a random eprom its possible you got the wrong one.
|
So could the wrong EPROM be causing limp mode?
|
possibly but you have to test stuff first.
|
Test the shift solenoids & speed sensors & such.. Wouldn't they be throwing codes?
|
figure out what code 36 is first.
|
Turns out the EPROM is for a manual trans truck. In the process of finding out the correct code EPROM needed.
|
All times are GMT -5. The time now is 05:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands