6.5 turbo no start it's cranking good
Hey I have a 96 K1500 6.5 turbo and it's not starting it has a new lift pump new fuel filter new crack pressure sensor new crank shaft position sensor and new battery and starter and new glow plugs and solenoid. It's cranking over fine I have fuel to the filter I bleed that I had fuel coming out the To gave drain at a steady flow I bleed the fuel that the injectors by cracking the lines and cranking. I'm getting smoke out the exhaust and it sounds like it wants to start by it wont. Im lost and tired of throwing parts at it.
|
Originally Posted by Ryan Gladwin
(Post 1131100)
Hey I have a 96 K1500 6.5 turbo and it's not starting it has a new lift pump new fuel filter new crack pressure sensor new crank shaft position sensor and new battery and starter and new glow plugs and solenoid. It's cranking over fine I have fuel to the filter I bleed that I had fuel coming out the To gave drain at a steady flow I bleed the fuel that the injectors by cracking the lines and cranking. I'm getting smoke out the exhaust and it sounds like it wants to start by it wont. Im lost and tired of throwing parts at it.
Sorry just seen where you said you replaced the crankshaft sensor is it a parts store one?? If so throw it away and get a AC/Delco disregard what I said about the PMD only use AC/Delco parts in the trucks and you will have less headaches in the long run. |
All times are GMT -5. The time now is 01:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands