1995 GMC 3500hd 6.5 turbo
Having issues... no power. Codes set for a few years. Pdm cooler. Had a service body with a crane and hyd. air comp. Any help?
|
care to post the trouble codes associated with the truck?
we need a lot more info that what you have provided to give any decent help. |
codes
Code. 62 is all I'm getting now. Had ecm 2 blow fuses. Fsd cooler from Green bay diesel.
|
codes
Code. 62 is all I'm getting now. Had ecm 2 blow fuses. Fsd cooler from Green bay diesel. Misses like air in fuel. Like the mechanical pumps better. Like my 6.9, & DT 466, v8 deutz.
|
DTC 62 - Turbo Boost Sensor Circuit Low
A common miss cause is from the optical sensor noise filter-remove it and get some ferrite core from radio shack so that you have a piece on each OS wire when the harness is plugged directly in without the electronic noise filter. |
I took it out and went from 4 codes to one. 62 but no 12. 3 of the wires had open copper.
|
You may need a new boost sensor but check the wiring?
Did removing the OS noise filter help with the miss? |
When noise filter was removed works good but still have a 62 code Intermittent. And ecm b blows like a short. Any idea where it runs?
|
Have you checked the boost sensor that is screwed down to the upper intake and it's wiring?
ECM B fuse powers the ECM,the LP relay and LP near as I can tell. |
Lp?
|
All times are GMT -5. The time now is 02:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands