Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Chevy/GMC 6.2L and 6.5L (https://www.dieselbombers.com/chevy-gmc-6-2l-6-5l/)
-   -   Starter engage when Fuse for Glow plugs in (https://www.dieselbombers.com/chevy-gmc-6-2l-6-5l/104868-starter-engage-when-fuse-glow-plugs.html)

Froggie Freeze 11-09-2012 08:31 PM

Can you tell me which sending unit this is it located on passenger side head at back and were i can find a wire diagram of it to trace wires, thinking ground in wires would be from it back toward the starter wire

racer55 11-09-2012 09:17 PM

If you were to post a picture of it,it would help.

I am leaning towards it being a glow plug sensor,but that is only used on mechanically injected engines in my experience.

A diagram from a 92,93 6.5 would be what you are after if that is the case.

Does your truck have an electronic throttle peddle or a cable connected to it?

Froggie Freeze 11-09-2012 09:53 PM

the peddle has a cable from it to i guess the throttle body cable is about 2 ft long. will get picture in morning, what i have found else where it maybe called a fuel injection pump cold advance solenoid engine cool switch found that on another site they also call it BWD - Efi Cold Start Switch
Part # WT7266
Here is web site with a picture if this will help
http://www.oreillyauto.com/site/c/de...word=wt7266#at

Thanks for all your help

racer55 11-10-2012 12:11 AM

Ok so you do have mechanical injection,that would indicate that your system is equivalent to a 92,93 6.5 and the wiring diagrams should match them.

Here is the switch again I believe:
DriveWire

---AutoMerged DoublePost---

This outside post explains that switch when used on a 6.2-should be the very same on yours:
Diesel Place : Chevrolet and GMC Diesel Truck Forums - View Single Post - Cold start advance on IP

With that info it would still seem to me that you have wires melted together inside the wire loom somewhere.

Anderson0 11-13-2012 10:55 PM

Hi everyone today am here to ask that Can you tell me which sending unit this is it located on passenger side head at back and were i can find a wire diagram of it to trace wires, thinking ground in wires would be from it back toward the starter wire???????

racer55 11-14-2012 08:14 AM


Originally Posted by Anderson0 (Post 960359)
Hi everyone today am here to ask that Can you tell me which sending unit this is it located on passenger side head at back and were i can find a wire diagram of it to trace wires, thinking ground in wires would be from it back toward the starter wire???????

Duplicate of the above posts,what in those answers did not apply to you?

Also you should be looking for a short circuit to power-not a ground.

Pauljenuss 04-16-2015 05:29 AM

will get picture in morning, what i have found else where it maybe called a fuel injection pump cold advance solenoid engine cool switch found that on another site they also call it BWD. ... is very comfortable in use.

burnhedge 04-16-2015 07:09 AM


Originally Posted by Pauljenuss (Post 1090721)
will get picture in morning, what i have found else where it maybe called a fuel injection pump cold advance solenoid engine cool switch found that on another site they also call it BWD. ... is very comfortable in use.

WTF


All times are GMT -5. The time now is 07:00 AM.


© 2024 MH Sub I, LLC dba Internet Brands