on my nissan truck i had i put one of these in

http://cgi.ebay.com/ebaymotors/Unive....c0.m245.l1318

ima go to the dealer a pick it up today :U:

nice find

Thank for posting this...I will have to see about getting this done. Thanks.:5:

ME THREE!
 

I'm goin' fur mine too!:U::c:

Mines done now.. I made my bracket out of a piece of that garage door hanger material like this..

http://i37.tinypic.com/9gzdkx.jpg

And cut a piece out and rounded the edges down for a piece like this..

http://i38.tinypic.com/14vn3p0.jpg

I flattened this out and bent it the other way to come up with a brakcet like this..

http://i38.tinypic.com/kespwg.jpg


And The final Result..

http://i37.tinypic.com/2hs5aud.jpg



Oh and just a heads up for anyone that is just learning about small modifications.. This is a little trick that MANY people use to keep their bolts from sliding up in the sockets.. Take a little piece of paper, or kleenex, or papertowel, and shove it down in the socket to keep the bolt from goin up in there real far, so you have more threads to work with on the other end..

Looks like this..

http://i35.tinypic.com/160q147.jpg


Then when you are done, you can take a nail or even a stick and poke it back out from the other end.

Thanks Zach for the idea on the mod! I love it, and reception is still fine for me.

:up2:



Tools used:

7mm Socket
Extension
1/4" Ratchet
some cheap-o galvanized material
hacksaw
2 glasses of crown & Pepsi