i know this might be crasy but y not....an pay no mind to my spelling be on a short time frame but i have an 96 dodge cummins with the stock holset turbo ...i dont have alot of cash to dump right now but i have done many mods,,,i would like to ran a twin set up with stock turbos dont no if its possible but do any body have any ides on this an what i would have to do to get it done ...thanks

---AutoMerged DoublePost---

CAN ANYONE HELP PLS

 

the only way it would work is with 3 stock chargers. if your dead set on doing it try to find a second hx35 with the 12cm housing and run a pair of those as the primary stage and try to find a H1C with a 16cm turbine housing to run on the manifold as the secondary. it will work and it will support a fair amount of power but the fab work is fairly complicated and in the end a single 63mm S300 would probably suit your needs much better. if your still running the stock charger then i doubt you have more fuel then a 63mm charger would cool. if you do plan further fuel mod's then start considering putting a S471 under your stock charger because for the money you would spend on a couple used hx turbos you can buy the S400 brand new and the piping would be way less complicated.

---AutoMerged DoublePost---

btw wrong forum section

 

THANKS MAN....just wanted to c if i can make that happen cuss ive nerver seen it done i have an s400 that i got off an 97 used ..had it broke down by my buddy an waiten to put it n use...just wanted to do a stock twin setup just to be doing it

 

triple hx's has been done already. just go back about 3 months in diesel power mag