When i went through school,they had one mack day cab over with an 18 speed tranny.This truck had the hardest tranny i've ever had to try and shift.I was never able to get the hang of it.And they had a pete class 8 with a 10 speed.It was the easyest tranny to shift.
|
The double clutching will kill your left leg and a Mack is the worst. I only use the clutch to start rolling then I speed shift for the rest of the gears.
|
i actually did really well today, barely ground any gears unlike my classmates in the truck!
|
get in one of them old bastards with the two shift levers for the trans, should be interesting. I've not been in one personally but seen a vid or two on youtube of some fellers runnin through them gears. Way too much work by todays standards!!!
|
I had a friend that had a couple of older dump trucks that had the twin stick shift,and i couldn't get the hang of it but it was fun to try.
|
CC,
Any updates???????? :pca1: |
UPDATES!!!!!!!!!
Went to Graduation Banquet on Fri. 5/22/09. Graduated with Certificate, Letter of Recommendation to Prospective Employers as well as a PERFECT score on my Pre-Trip Inspection. I already have a Job Interview as a cement truck here locally on Tuesday!! |
Good job bud..........Good luck on the Job Interview :5:
|
what you learn in class has almost nothing to do with day to day trucking. double clutch? whats that? you have about three years of driving with no tickets or crashes before you get a good job. if you live in iowa try to get in a bull rack. i think its about the best money besides frozen food or cars.good luck and keep us posted.
|
my record is clean back to May of 06 for driving infractions.
|
start looking for a bull rack now, who knows you may luck out. do you know anything about cows? good money in it. most pay % of the load.
|
Originally Posted by 97cummins
(Post 333294)
Good luck in class and on the road.i've been there.Lil advise,watch out for ALL four wheelers.Especially the ricers.They cut me off,tailgate me,and come to an almost dead stop in front of me.Be very careful around them.:U:
|
well...i got the job doing concrete!
|
:U:
|
Congrats :c:
Don't hit any laborers with the chute and watch for idiots parking behind your truck on the job site. |
yay me...i need beer to celebrate now!!
|
your going to need to be thinking of a good handle
|
CB handle?
|
Originally Posted by CumminsCrazed
(Post 340966)
UPDATES!!!!!!!!!
Went to Graduation Banquet on Fri. 5/22/09. Graduated with Certificate, Letter of Recommendation to Prospective Employers as well as a PERFECT score on my Pre-Trip Inspection. I already have a Job Interview as a cement truck here locally on Tuesday!! good job Zack........congrats I have poured a few thousand yards of crete as a contractor and I want you to know whwn the dude says pull up 8 inches he dont mean a foot...................a good crete driver can make yer day big time :U: |
ok well...i can sure try but being new i wont be perfect by any means!
|
Yup Congrats...
|
Originally Posted by Diesel Powered Rocket
(Post 342164)
watch for idiots parking behind your truck on the job site.
|
All times are GMT -5. The time now is 10:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands