New Keyboard
 

Got it today WOOT that was fast using it now its wireless with a mouse too

Logitech LX710

It has "soft Keys" like pushing on budda'

:)

And i have the letter "JJJJ" back and the "?????" :j:

DM

jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjsy congratulating you ..... i think. is that okay ?????


bout time :)

Yeahhh, a J and a ? can come in handy!!! lol

DM just be more careful with this one. And dont ask so many questions, probably wont wear out the ? key as fast next time. lol

I hate to even ask why you needed a new keyboard....so I wont.

And PLEASE dont tell me either.

Well New Key Board is Shot already , Everything was fine till i installed the software tat came wit it so i can set all the goodies up now the stinkin letter "h" just lower case shows up 3 times if i dont immediately put something after it WTF!


hhh
hhh
hhh
hhh
hhh
hh
hh
hhh
hh
hhh

Ojnly pushed it once on each line WHAT A POS

Have contacted support Yadayadayada

Shhheshhh

DM

I have the Logitech diNovo and it works flawlessly probably because I didn't install the software yet...lol

Hope you get it working again

Maybe they have updated drivers for it on their website???

I updated and still nothing I went into the keyboard options on vista and turned the repeat down so far i can live with it

DM

So it is working good now? How do you like Vista?

Vista Awesome , I have a Dual Core Pentium with Viiv

I slowed the repeat down and now the hhhhhhhhhhhhhhhhhh wont show thhis ting is JACKKED UP

DM

nice rig, I'm still using my trusty ol amd 2500 and just intalled a Radeon X850 and xp media center edition so it will be awhile before I upgrade again.

Have you tried unistalling the logitech software

YEp didnt help I ave a new update trying now......

well best of luck with that one

This update must be 40 GB

ITs still going at 50kb/s for like 15 mins now

DM

done yet?

Yep It wants me to restart i dont want to will see if its fixed tomorrow

DM half of the time the h dont work at all

I had to restart the puter for some thing and when it came back up the "H" was working right I dont know what fixed it but this may help anyone who sees this thread in the year 2020

Thank you for contacting Logitech Customer Support. My name is Idayani and I will be assisting you with your case involving Cordless Desktop LX710 Laser.

As I understand it, there is repeating keys of the "h" key. If this is not correct, please let me know.

Chad, at this point, I need you to check on these two things first as majority of repeating key issues are caused by interference:

a. Check for any source of RF interference close to the keyboard/mouse and keep it at least 8 inches away from the keyboard and mouse.
b.Check for cordless phones using 2.4GHz frequency or a wireless router or wireless access point nearby. If any are present, suggest moving them further away.

Chad, if the issue still persists, I would suggest you do hard reset. This is to drain out the capacitors in the device. To do this, you need to follow the steps provided below.
1. Remove the batteries from the keyboard and press keys on the keyboard repeatedly (as if typing) for approximately two minutes. This will clear out the capacitors.
2.Press the Connect button on the receiver.
3.Press the Connect button on the mouse. NOTE: You may need a pencil tip or other small tip to press the connect button.
4.Press the Connect button on the receiver.
5.Insert the batteries back into the keyboard.
6.Press the Connect button on the keyboard.

Please try to change to new fresh batteries and please ensure the batteries are replaced with correct polarities.

If that doesn't resolve the issue, I would suggest that you try connecting your keyboard in Embedded Mode. This is to ensure that the keyboard will work with basic functionality without SetPoint/iTouch installed. To do this, uninstall the SetPoint/iTouch software from your computer.
a. Open the Windows Control Panel.
b. Open the Add/Remove Programs window.
c. Locate the listing for SetPoint/iTouch and remove it.
d. Locate any other keyboard/mouse software and remove it as well as this software may interfere with SetPoint/iTouch software.

Reconnect your keyboard and please test to see if the issue still persists.

If that doesn't help, please ensure the keyboard is directly plugged into the ports without using USB hub or any bypass cable. Please test the keyboard on another USB ports on your system.

You would also want to test the keyboard on a different system. This is to ensure if it is a hardware issue.

Please let me know if this resolves your issue or if you require further assistance as I will be more than happy to assist you with your issue.

Thank you and have a great day Chad.

Sincerely,

Idayani
Logitech Customer Support
www.Logitech.com/support

In United States 702-269-3457
In Canada 416-207-2782
Business Hours:
6:00AM – 6:00PM PST Monday-Friday