![]() |
can you do the 2003 6.0?
|
Ok here is an update.
At this time I making them for the 7.3 Powerstroke. Both OBS and the Superduty. The 7.3 Powerstroke intake comes complete with filter, clamps, AND CCV delete mod, powdercoated in whatever color you want. Price is $200 plus shipping (shipping averages $20.00) I am currently building an intake for the 24valva cummins. It will be sent out shortly for test fitment. If all is well with the fitment, the 24valve intakes will be $200 complete with your choice of colors in Powdercoat. Again these will be complete with everything needed for installation! 6.0..... She is a miserable lil bastard with all of its completed bends and damn MAF sensor. I am hoping to have a solution this week do stand by! 12valve and other cummins I need to see how you are setup to see how similar it is compared to the 24valve 2nd generation ram. FUMMINS.... Please let me get my hands on one!!!!! So again the 7.3's are shipping out and customers love them. $200 plus $20 for shipping. NOW... I do have presently a few options for filters. The standard filter is the water resistant Donaldson which is the same dimensions as the "6637". Then there are optional filters that are an up charge.the include Green filters, K&N, and AFE. Don't forget to visit us on Facebook and like the page. http://www.facebook.com/pages/Zombie...94218003943091 ---AutoMerged DoublePost--- Ok so after further research the 12 valve and 24 valve are the same!!!! So get ready 12 and 24 valve guys!! |
let me know when you get the 24v done. I want to get rid of my plastic pipe:tu:
|
Originally Posted by cerickson
(Post 845416)
let me know when you get the 24v done. I want to get rid of my plastic pipe:tu:
|
Welcome home gregg,glad your safe.:tu:
|
Thanks bud
|
Let me know when you do a 6.0 :) ill help in any way i can to get the 6.0 ball rolling faster if needed
|
Originally Posted by brondondolon
(Post 846055)
Let me know when you do a 6.0 :) ill help in any way i can to get the 6.0 ball rolling faster if needed
|
Bump :c:
I'm holding out for a Fummins one |
I can do a Fummins, that should be fairly easy. Send me pics of your engine bay and approximate measurements if the area I have to work with. Zombiesoldier01@yahoo.com
As far as the 6.0 I have lost my mock up vehicle due to moving across country. |
Originally Posted by ZombieSoldier
(Post 868897)
I can do a Fummins, that should be fairly easy. Send me pics of your engine bay and approximate measurements if the area I have to work with. Zombiesoldier01@yahoo.com
As far as the 6.0 I have lost my mock up vehicle due to moving across country. |
where are you located zombie??
|
Just moved from Colorado to Hinesville Georgia
|
im like 2.5 hours away from you
|
well come on down bro! come down, hang out for the day or a weekend, whatever! we will do a crab boil and i can design the intake to work!
|
will do!!!
|
Give me a call sometime so we can set something up. 719-237-0845 Gregg
|
k, il let you know when i get a chance. can you text?
|
Yes sir. Got an iPhone.
|
k, il shoot you a text in a min. i cant talk on the phone at work:dang:
|
9 Attachment(s)
here are some photos to grab your interest for the 7.3! BTW we now sell the intakes in a beautifully smooth mandrel bent Aluminum tubing that is a one piece unit that has the integrated CCV delete in it, no more 2 piece intakes from zombie intakes!
Attachment 38622 Attachment 38623 Attachment 38624 Attachment 38625 Attachment 38626 filter options are as follows: Donaldson Attachment 38627 Green Filters USA Attachment 38628 AEM Attachment 38629 K&N Attachment 38630 |
this is the same exact setup on my 97. not to be a complete :moon:hole or nothing but anyone can make there own for like 70 bucks
|
Now this is true but then you add powdercoating, and CCV delete pieces an you will see where the cost comes from. Some people would rather just buy a complete kit and throw it on and not have to worry about measuring, cutting, painting etc. that's where this comes in. Btw ours is 1 piece aluminum now so it's no longer 2 piece so it looks much better astetically. Thanks for your input though.:humm:
|
Originally Posted by codyawise
(Post 875228)
this is the same exact setup on my 97. not to be a complete :moon:hole or nothing but anyone can make there own for like 70 bucks
Originally Posted by ZombieSoldier
(Post 875229)
Some people would rather just buy a complete kit and throw it on and not have to worry about measuring, cutting, painting etc. that's where this comes in.
|
thanks EasternAggie. Some people just dont get it do they? :nope:
---AutoMerged DoublePost--- btw a new eBay auction was put up for these. eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices |
I loved my air filter system from gregg on my 2002 7.3.
I have now sold it and bought a 2004 Excursion 6.0 and want a new intake!!!! Gregg, when will the 6.0L be ready? I am in Cumming, GA. |
I like mine from gregg for my 12 valve.:tu:
|
thanks guys. pulpit i am trying to get a vehicle to use to mock up a system
|
Sounds good. Keep us posted.
|
make a 6.0 yet?
|
Dang this would be seet for the 6.0..... Any luck yet?
|
WHat's the difference between the filter you use and say a K&N that's cleanable and rechargable. Is yours basically the same or does it need replaced ever so often?
|
Originally Posted by ZombieSoldier
(Post 816029)
Get the look of an expensive CAI for much less!!
Powder coated will be $155 plus actual shipping here is mine in powder coat chrome http://i142.photobucket.com/albums/r...3/DSC_0218.jpg |
Originally Posted by DirtiMaxDougie
(Post 965117)
Hot air = less dense, higher EGTs. Are you going to manufacture a heat shield for those filters in the near future?
either way, no i am not planning on a shield. it would be more money added to the cost, which would drive it out of the affordability market and into big manufacturer territory. I dont make these for profit. I am full time active duty army, doing this on the side to help fellow diesel guys have an attractive affordable intake. |
I pm'D you yesterday, and tried emailing you. im interested in the intake. Please email me at evantemerson@gmail.com thanks a lot!
|
Sorry it went to my spam emails.
|
Any increased mileage noted with this setup on a stock 7.3?
|
Nothing documented, but I wouldn't see why, IF you keep your foot out of the throttle, since you hear the turbo a lot better, and it sounds so good LOL
|
Curious if you've thought bout making them for the Dirtys as well..didn't see anyone ask that yet.
|
i have been wanting to, but haven't had a chance to get my hands on one at all. currently i am deployed to Afghanistan so production has been stopped until i return.
|
All times are GMT -5. The time now is 08:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands