Old Ford Solenoid as Glow plug relay for om617 / amateur in need of help
1 Attachment(s)
I'm trying to wire my glow plugs to a switch in cabin that will enable to turn on and off my glow plugs when I choose to with the flip of a switch.
I got the idea from a youtuber, he did similar work but he still had he original glow plug relay connected for the sensors Anyhow I think I'm close to getting it done but I keep second guessing myself, and the last thing I want to do is burn out the glow plugs or burn out the solenoid. Pictures: A - 5 glow plugs wires (running from glow plugs to negative post) B - brown Wire going to inside of cabin (running from starter post to inside of car) C - green wire (connected to black thick gauge cable/to starter post on solenoid) D - black thick gauge wire (to positive post on battery and on positive post solenoid) |
1 Attachment(s)
Here's another
|
1 Attachment(s)
And last one
|
F and B are the same wire, and E is a ground inside cabin
|
All times are GMT -5. The time now is 06:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands