Diesel Bombers

5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

Fuel rail pressure sensor?

Thread Tools
 
Search this Thread
 
Old Sep 7, 2011 | 02:39 AM
Share
  #1  
Pikeslayer's Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2011
Posts: 21
Likes: 0
From: Alaska
Default Fuel rail pressure sensor?
will the fuel rail pressure sensor going bad make the truck lope, and run like it has a fuel issue.
 
Reply
0
Old Sep 7, 2011 | 06:30 PM
Share
  #2  
cummin_un_glued's Avatar
FormerVendor
iTrader: (1)
Joined: Mar 2007
Posts: 1,748
Likes: 107
From: Ash Flat Arkansas
Default
a bad fca could possibly do that, have you unhooked the EZ and tried it stock?
 
Reply
0
Old Sep 7, 2011 | 07:03 PM
Share
  #3  
Pikeslayer's Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2011
Posts: 21
Likes: 0
From: Alaska
Default
Yes, That was the first thing I did.
 
Reply
0
Old Sep 7, 2011 | 08:15 PM
Share
  #4  
cummin_un_glued's Avatar
FormerVendor
iTrader: (1)
Joined: Mar 2007
Posts: 1,748
Likes: 107
From: Ash Flat Arkansas
Default
have a buddy with a 05-07 truck you could borrow the fca off of since it only takes a few min to change?
 
Reply
0
Old Sep 7, 2011 | 08:56 PM
Share
  #5  
Pikeslayer's Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2011
Posts: 21
Likes: 0
From: Alaska
Default
I live in Alaska.
 
Reply
0
Old Sep 7, 2011 | 09:38 PM
Share
  #6  
dcpowell17's Avatar
Diesel Fan
Joined: Jul 2011
Posts: 68
Likes: 5
From: Austell, Ga
Default
what is your lift pump pressure? Lope? Is the idle going up and down?
What is your fuel rail pressure at idle? Should be round 9,000 lbs.
 
Reply
0
Old Sep 8, 2011 | 07:44 PM
Share
  #7  
98dodgecummins's Avatar
Diesel Wrench
Joined: Oct 2009
Posts: 510
Likes: 8
Default
my idle is going up and down what is this?
 
Reply
0
Old Sep 8, 2011 | 08:35 PM
Share
  #8  
cummin_un_glued's Avatar
FormerVendor
iTrader: (1)
Joined: Mar 2007
Posts: 1,748
Likes: 107
From: Ash Flat Arkansas
Default
i'm leaning toward the FCA with the idle going up and down new one from cummins is about $150
 
Reply
0
Old Sep 9, 2011 | 03:57 AM
Share
  #9  
Pikeslayer's Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2011
Posts: 21
Likes: 0
From: Alaska
Default
By lope I mean my truck sounds like it has a cam in it. How would I check lift pump pressure or fuel rail pressure.
 
Reply
0
Old Sep 9, 2011 | 08:01 PM
Share
  #10  
cummin_un_glued's Avatar
FormerVendor
iTrader: (1)
Joined: Mar 2007
Posts: 1,748
Likes: 107
From: Ash Flat Arkansas
Default
lift pump press can be checked with a mechanical guage but the rail pressure will have to be checked with a scan tool
 
Reply
0



Advanced Search

All times are GMT -5. The time now is 08:01 AM.