Hi guys
I have to replace both of the cooler lines coming out of the trans cooler i don't want to buy the oem lines because they will just rust out again what kind of line could i get that i could pick up at a store like autozone i need the truck back on the road by monday.

Thanks,
Steve

 

i had pinholes in my cooler lines and i just cut out the section with the holes and replaced it with rubber trans lines and double clamped it. its holding so far.

 

Does any one know what size the oem steel lines are im going to put a flare fitting and some hydraulic hose just need to know what size flare fitting to get?

Thanks
Steve

 

i did the same thing with mine, i cut them and slipped the rubber hose over and double clamped them and its working great with no leaks, i believe a 1/2" ID tube with side over the steel line iirc