Manifold Heater
Thread Starter
|
Diesel Enthusiast
Joined: Feb 2010
Posts: 352
Likes: 31
From: Wisconsin
Manifold Heater
On cold days, the wait to start light flashes rapidly and eventually goes solid before shutting off. I can hear i assume a relay clicking rapidly? is that normal?
Diesel Enthusiast
Joined: Jun 2010
Posts: 366
Likes: 42
From: Palmyra, Nebraska
No.
You may have a faulty temp sensor.
It's supposed to come on solid below 50* and go out once the manifold temp rises above that temperature.
It will then cycle the grid heaters once the engine is running until the engine is warmed.
Mark.
Mark.
You may have a faulty temp sensor.
It's supposed to come on solid below 50* and go out once the manifold temp rises above that temperature.
It will then cycle the grid heaters once the engine is running until the engine is warmed.
Mark.
Mark.
Thread
Thread Starter
Forum
Replies
Last Post
cummins Pride
12 Valve 2nd Gen Dodge Cummins 94-98
7
Oct 23, 2014 01:10 PM
