howdy,my friend just got a 95 12 valve can you guys tell us were the fuel screw is(pictures work better)and how far do you turn it?I know you guys have all done this a million times,so let us know what we need to.thanks.

 

Check the forum, there are some really informative discussions that'll answer all your questions....and then some... Happy Hunting!!!

 

ok thanks for replying so quickly,i will check it out.happy huntin yourself.

 

its under the afc housing on the back of the ip~!

 

I am new to this site and have red a lot of post about turning the pump up and most everyone says don't do it unless you have a pyro gauge a few clicks im sure isnt bad but i turned mine back until i get a pyro.

 

Best to get a egt(pyro) guage first.When you start turning up the fueling, the egt's start going up.
Also ask your friend if the kdp has been dealt with.

 

i turned mine up alot with 4'' exhaust never had it get hot on me and i pull 9000 lbs trailer from mi to ky every week 70 mph

 

good for u you turned it up alot huh if so it should be climbing on at least on a bog!!