I am going to take my turbo off bc it sounds like the unison ring isnt working properly so I am going to clean it all and see if it helps with my lag. Was wondering if anybody can posts pictures of how to take it off and clean the inside. I WOULD GREATLY APPRECIATE IT

 

i cant take it off and take pics but im sure on a stroker ud ahve to pull the cab and dog house up to get it off there a pain

 

It doesnt look that hard i dont think i need to pull the cab. Has anyone ever taken there turbo off there truck do u have to pull the dog house up to get it out????

 

the Turbo can come off of a 6.0 without pulling the cab or box. It isn't too hard....just a little tight and far back...hardest thing i found with taking the turbo off was the downpipe... but tons of penitratiing oil and giving it time to do it's thing helped a lot.

 

Ok do u know were i can get a step by step how to take the turbo off instructions? Pictures would be great but i dont have to have pictures

 

not for turbo specifically off the top of my head... but on BulletProofDiesel's web site there is a PDF file on the install for the Redesigned EGR cooler which includes taking off the turbo etc. It has some pics and details that might help you out. it is rather strait forward once you get to doing it. If i run across any other sites with pics/intructions I'll post it for you.

 

go to diesel power mag.com kydtr.com and go to the right side of the page they may have it

 

Here...

Diesel Technician Society

I swear I post that at least three times a week here...

Do yourself a favor and just bookmark the home page to that.

---AutoMerged DoublePost---


Such a helpful post.