i tested the wires for my cruis the other day and noticed juice at the switches on the wheel but no juice at the servo moter itself. anyone have any idea were the wires go inbetween the two

 

Well I noticed nobody has posted yet thought I'd at least try to help. If all the fuses are good, I'd check the conector body . I looked at mine and I swore there was an electrical connection. 2 or 3 wire conection. The wires appear to run into a harness correct?. From there I believe goes to pcm. Check wires for corrosion I reckon. I know squirrells and mice are bad here in Indiana they like to nibble on wires. Just tryin to help elimanate some things

 

i might try that