24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

thinking of converting to a 5 speed, is it worth it?

Thread Tools
 
Search this Thread
 
Old Dec 5, 2008 | 10:34 PM
  #1  
underpressure!'s Avatar
Thread Starter
|
Diesel Fan
Joined: Aug 2008
Posts: 66
Likes: 2
From: Circleville,Ohio
Default thinking of converting to a 5 speed, is it worth it?

so i'm thinking of converting my truck from a built auto to a dual disc 5-speed.......i guess what i'm asking is, do you really think it's worth the money and the labor to do it? I know you lose more power goin thru the auto than the 5-speed but also not cheap to do the swap
 
Reply
Old Dec 5, 2008 | 10:38 PM
  #2  
94cummins12v's Avatar
Diesel Bomber
Joined: Jan 2008
Posts: 4,525
Likes: 103
From: Havre mt
Default

love mine
 
Reply
Old Dec 5, 2008 | 10:39 PM
  #3  
stkdram55's Avatar
BOMBARDIER
Joined: May 2008
Posts: 6,548
Likes: 279
From: New Holland Ohio
Default

i would say it depends on what your wanting to do with the truck, if your wanting to make it a puller (it might already be after reading your sig) then i would say absolutely its worth it, its really not that expensive about $5-6k including a good clutch...
 
Reply
Old Dec 6, 2008 | 06:26 AM
  #4  
Dieselfreak77's Avatar
Diesel Fan
Joined: Jul 2007
Posts: 44
Likes: 0
From: Campbell, NY
Default

I was thinking of doing mine to but it depends on what you do with it or what you want do with it. I would put a 6 speed in if it was me. It also depends on what is available and price. I know if i have to my drive train ever again it's going to be stick because I haul cattle and equipment. Just my 2 cents
 
Reply
Old Dec 6, 2008 | 12:46 PM
  #5  
underpressure!'s Avatar
Thread Starter
|
Diesel Fan
Joined: Aug 2008
Posts: 66
Likes: 2
From: Circleville,Ohio
Default

Well I tow alot with it now and i am going to start pulling with it next year and i just want to get all my power to the ground i ran on a dyno and put down 617hp/1288tq but also could have been around 650 not having to go thru the auto
 
Reply
Old Dec 7, 2008 | 09:58 AM
  #6  
Mopar1973Man's Avatar
Diesel Wrench
Joined: Mar 2007
Posts: 820
Likes: 132
From: New Meadows, Idaho
Default

For pulling power a 5 speed is excellent and seem to be rather strong for me. (381/826) I haul heavy and pull hard too...









Trust me a 5 speed can handle a lot... But since your high in thr HP/TQ curve than me I would upgrade the input shafts before installing...
 
Reply
Old Dec 7, 2008 | 11:04 AM
  #7  
dukeboy_318's Avatar
Diesel Bomber
Joined: May 2008
Posts: 1,306
Likes: 119
From: columbus, In, home o
Default

i love my 5 spd, i think its worth every penny to do the swap, especially considering what you want to do with it, right now a nv4500 runs about 1k from most junkyards and 2500 new, input shaft will run anywhere from 500-900(1 3/8 in dia) and i reccomend the south bend 3850 dual disc clutch, itll set you back around 1800-2200 depending on the dealer. plus youll need the hydraulic kit which runs about 300, the pedal assymblies will run about 350 bucks from dodge dealers, may find em in a junkyard cheaper. I was gonna do this swap on my 98.5 but decided just to sell the truck to my brother and let him deal with the automatic issues
 
Reply
Old Dec 7, 2008 | 12:08 PM
  #8  
Mr.Krabs's Avatar
Diesel Wrench
Joined: Mar 2008
Posts: 808
Likes: 26
From: Lewiston Idaho
Default

You can get the stuff cheaper than that,I've got one that I'm selling,$1850,but it's sold already,thats for almost everything (pedals,steering column,ect)
 
Reply
Old Dec 7, 2008 | 05:46 PM
  #9  
dukeboy_318's Avatar
Diesel Bomber
Joined: May 2008
Posts: 1,306
Likes: 119
From: columbus, In, home o
Default

those numbers were from the summer time when i was contemplating it
 
Reply
Old Dec 7, 2008 | 09:23 PM
  #10  
stkdram55's Avatar
BOMBARDIER
Joined: May 2008
Posts: 6,548
Likes: 279
From: New Holland Ohio
Default

yeah alot of the things you can find off ebay, my friend just did this swap last year, he got the pedals, bell housing, tranny, and the console for on the floor on ebay for about i think $16-1700.
 
Reply



All times are GMT -5. The time now is 03:17 AM.